Energy Savings Calculator for Commercial Boilers
(Closed Loop, Space Heating Applications Only)
This cost calculator is a screening tool that estimates a product's lifetime energy cost savings at various efficiency levels.
Learn more about the base model and other assumptions.
You Can Spend
Up to more per unit
A boiler of the efficiency you specified will save in lifetime avoided energy costs compared to your existing boiler. You could save more by buying at the required FEMP efficiency level. The minimum thermal efficiency for Federal purchases is %. Federal buyers are required to buy at the minimum thermal efficiency level unless they have a costeffectiveness or functional exception. You've entered an efficiency level below the FEMP required level and you're losing each year. Can you justify a waiver?
Existing Boiler 
Base Model  FEMP Min. Efficiency Requirement 
Best Available 
Your Choice 


Lifetime Energy Cost Savings* 

Lifetime Energy Costs 

Annual Energy Costs 

Annual Energy Use (therm) 

Thermal Efficiency (%) 
*Note that these savings have been discounted to present value and nondiscounted savings would be higher.
Assumptions
This energy savings calculator only provides information about the relative difference between two equivalent products, all other factors being equal. Other assumptions include:
This energy savings calculator only provides information about the relative difference between two equivalent products, all other factors being equal. Other assumptions include:
 Base model  Values represent a 1,000,000 Btu/hour gasfired, hotwater boiler operated for 1,500 fullload hours per year with a thermal efficiency of 80%. The performance of this standard unit is based on ASHRAE 90.12007.
 Thermal efficiency (E_{t})  Represents a boiler's energy output divided by energy input as defined by ANSI Z21.13. A boiler's thermal efficiency rating should be used to determine compliance with Federal procurement requirements.
 Default values  The values preloaded into the calculator represent average operating conditions in the Federal sector.
 U.S. Federal average gas price  $/therm
 U.S. Federal average fuel oil price  $/gallon
 Price trends and discount rate  Future electricity price trends and a discount rate of 3.2% are based on Federal guidelines.
 Lifetime energy costs  Values represent the sum of the discounted value of annual energy costs, based on an assumed boiler life of 25 years.
 Condensing boiler annual energy use  Adjusted for an assumed boiler operation of 50% condensing mode versus 50% noncondensing mode.