High-Concentration, Low-Cost Parabolic Trough System for Baseload CSP
SkyFuel, under the Baseload CSP FOA, is developing an advanced, low-cost CSP collector using higher-concentration, higher-temperature, parabolic trough technology to substantially reduce the cost of baseload utility-scale solar power generation.
SkyFuel is working toward two anticipated outcomes:
- A baseload parabolic trough collector that is optimized for high-temperature service with a maximum temperature of 100°C above prior state-of-the-art systems (up to 500°C or more). High-temperature design points demand larger apertures and concentration ratios (40%–90% greater than the prior state of the art) with associated improvements in optical accuracy (30%–75% over the prior state of the art).
- A baseload trough that realizes significant reductions in cost because of the larger aperture, while incorporating additional advancements that substantially lower installed solar field costs. For example, the reflective film surfaces are being upgraded to improve reflectance and specularity. A surface coat is being developed to provide anti-soiling and abrasion resistance.
SkyFuel is demonstrating the SkyTrough DSP - a novel parabolic trough with a 25% increase in concentration ratio, a 40% increase in aperture width, and a 50% increase in length compared to today's troughs.
The increased concentration ratio coupled with an operating temperature 100°C higher than the current state-of-the-art trough designs supports higher efficiency power cycles and substantially reduced thermal storage costs.
Publications, Patents, and Awards
At this time, this project does not have published articles, patents, or awards.
Quarterly Progress Reports