U.S. Department of Energy - Energy Efficiency and Renewable Energy
Below are some of the prestigious awards won and accomplishments earned by projects funded through EERE's Solar Energy Technologies Office, which manages the overall direction of the SunShot Initiative.
SunShot builds on a legacy of successful collaboration between pioneers in the solar industry and the DOE Solar Office. Photovoltaic (PV) research sponsored by the Solar Program has resulted in 274 patent families, and 30% of other patents in the solar energy field are linked to EERE-attributed patents—more than any other organization.
Many of the research achievements were awarded to DOE's industry and university partners working together with the national laboratories, including the National Renewable Energy Laboratory (NREL), Sandia National Laboratories (SNL), Lawrence Berkeley National Laboratory (Berkley Lab), Oak Ridge National Laboratory (ORNL), and Pacific Northwest National Laboratory (PNNL).
The following awards recognized recent achievements in science and research by DOE Solar Office partners.
World Record Efficiency for CdTe Solar Module: First Solar set a new world record for cadmium-telluride (CdTe) solar module efficiency, achieving 14.4% total area efficiency. Just six months earlier, the company set the CdTe solar cell record at 17.3%.
Awarded by R&D Magazine, the R&D 100 Awards honor the top 100 innovations of the year and showcase the best new technologies from around the world. Below are the winning inventions listed by year and the DOE national laboratories and Solar Program partners that received awards.
Microsystems Enabled Photovoltaics (MEPV): MPEV cells are tiny, glitter-sized photovoltaic (PV) cells also known as "solar glitter." These PV cells are created using mature microdesign and microfabrication techniques, then released into a solution similar to printing ink and printed onto a low-cost substrate with embedded contacts and microlenses for focusing sunlight onto the cells. MPEV technology has potential applications in buildings, houses, clothing, portable electronics, vehicles, and other contoured structures. (Sandia National Laboratories)
SJ3 Solar Cell: This triple-junction solar cell achieved a world-record conversion efficiency of 43.5% with potential to reach 50%. Like a three-blade safety razor that uses all its blades for a closer shave, the SJ3 cell captures different light frequencies, ensuring the best conversion of photons to electrons. The 43.5% efficiency occurs under lens-focused light having 418 times the intensity of the sun. (National Renewable Energy Laboratory and Solar Junction)
Flash Quantum Efficiency System: The ability to measure, in a second, the quantum efficiency of a PV solar cell lets manufacturers assemble more reliable modules by taking into account blue and red variations in a solar cell's spectral responses. (NREL and Tau Science Corporation)
Optical Cavity Furnace: A new optical furnace uses photons to uniformly heat crystalline solar cells and semiconductor materials, increasing the efficiency of the cells by 3% to 4% at a fraction of the cost of conventional, thermal ovens. (NREL and AOS Solar)
Silicon Ink for High-Efficiency Solar Cells: Screen printing a liquid form of silicon produces an immediate increase in solar cell efficiency by allowing lighter doping, thus enhancing response to the blue portion of the spectrum. The cost-effective process will boost cell efficiency by about 6% and improve the manufacturing bottom line by up to 20%. (NREL and Innovalight)
Ultra-High-Voltage Silicon Carbide Thyristor: This semiconductor-based, ultra-high-voltage, silicon-carbide thyristor allows next-generation "smart grid" power electronics systems to be built that are as much as 10 times smaller and lighter than current silicon-based technologies. (GeneSiC Semiconductor, SNL, DOE, and U.S. Army/ERDC)
Demand Response Inverter: Adding value for the system owner and local utility, the Demand Response Inverter reduces the levelized cost of energy of PV power and provides grid-support functionality that encourages high penetration of PV power systems into the electrical grid. (SNL and Princeton Power Systems)
NREL research scientist Hao-Chih Yuan displays silicon wafers before (left) and after (right) the wet-chemical etching process that creates award-winning "black silicon" solar cells. Photo by Dennis Schroeder, NREL/PIX 17852
Black Silicon Nanocatalytic Wet-Chemical Etch: Inexpensive, one-step, "black silicon" solar cells—chemically etched to appear black—better absorb the sun's energy and reduce light reflection from silicon wafers to less than 2%, promising to reduce manufacturing cost and capital expense. (NREL)
Amonix 7700 Solar Power Generator: This highly concentrated, highly efficient bulk power generator produces 40% more energy than conventional fixed PV panels. (NREL and Amonix)
Multifunctional Optical Coatings by Rapid Self-Assembly: This process creates film-like coatings under ambient conditions, without high temperatures or considerable vacuum, for consumer electronics, semiconductor devices, and high-performance glass and ceramics. (SNL and Lockheed Martin Aerodynamics)
Micro Power Source: A battery covered by thin-film PV harvests sunlight and recharges itself. The 1-microliter volume device operates at a high-peak-power density greater than 1,000 watts per liter, making the device useful for powering wireless micro-systems that sense, record, transmit, and/or actuate. (SNL, PNNL, Front Edge Technology, University of California, Los Angeles, and The Henry Samuel School of Engineering and Applied Science)
Nanocrystal Solar Cells:They are ultra-thin solar cells based on dense nanocrystal films, without any organic materials. They have an efficiency potential of about 25%, matching that of silicon cells. (Berkeley Lab and Solexant)
PulseForge 3100 with Pulse Thermal Processing: This unique thermal processing technique applies extremely high-intensity radiant heat to the surface of materials quickly (milliseconds to microseconds). The PulseForge 3100 is a commercial tool that employs this technology for high-speed drying, curing, sintering, or annealing high-temperature materials on plastic and paper, enabling inexpensive and flexible electronics and solar applications. (ORNL)
Ultra-Accelerated Weathering System: A multifaceted ultraviolet solar concentrator that is used to speed up the exposure of coatings, paints, and other materials to determine their durability and resistance to weathering. (NREL)
Inverted Metamorphic Multijunction Solar Cell: In this new method, the cell is grown upside down. These layers use high-energy materials with extremely high quality crystals, especially in the upper layers of the cell where most of the power is produced. (NREL, Emcore Corp., and Air Force Research Laboratories Space Vehicles Directorate)
Hybrid Solar Lighting: This technology uses a rooftop-mounted, 48-inch diameter collector and secondary mirror that track the sun throughout the day. The collector system focuses the sunlight into numerous optical fibers connected to light fixtures equipped with diffusion rods similar to fluorescent light bulbs. (ORNL)
Sinton QSSPC Silicon Evaluation System: The system helps manufacturers detect impurities and defects in silicon material early in the solar cell production process—thus saving manufacturers processing time, money, and silicon feedstock. The result is a higher yield of efficient cells and reduced manufacturing costs. (NREL)
Lightweight, Flexible, Thin-Film CIGS PV Modules: This was the first portable, flexible PV system made from CIGS for use in mobile applications. It was lighter, cheaper, and more efficient and reliable than previous amorphous silicon technologies. (NREL, Global Solar, and ITN Energy Systems)
PowerView™ Semi-Transparent Photovoltaic Module: It is semi-transparent, making it ideal to be used in lieu of architectural glass for many applications, particularly for those that call for sloped glazing, such as awnings, canopies, or slanted roofs. (BP Solar and NREL)
Triple-Junction Terrestrial Concentrator Solar Cell: The cell converted as much as 34% of sunlight to electricity, which was almost 40% higher than its nearest competitor. Also, at its highest rated concentration (1200 suns), the cell produced three times the power of its nearest competitor. (NREL)
Electroexploded Metal Nanopowders: These were a new approach to ultrafine metal powder production. The nanopowders were low-cost, could be made with a broad range of metals, and the particles were up to 500 times smaller than those in previous commercially available metal powders. (NREL)
Siemens Solar St-Family of Solar (CIS) Modules: The first large-area solar electric modules made from the promising thin-film material of copper indium diselenide. (NREL)
UNI-SOLAR Triple-Junction Amorphous-Silicon Solar-Electric Modules: Thin, flexible, waterproof roof shingles that efficiently produce electricity from sunlight. (NREL)
"PV Optics" Software Light-Trapping Model for Solar Cells: Software that enhances and accelerates solar cell designs by modeling how light is absorbed in cell materials. (NREL)
Method for Making Silicon Carbide Powder: A novel technique for producing fine, pure, inexpensive powder for use in making industrial and electronic ceramic products. (NREL)
Transpired Solar Collector: A simple, elegant idea—a perforated metal wall that captures solar energy to heat and ventilate buildings. (NREL)
Scanning Defect Mapping System: Uses a scanning laser to produce maps of crystal defects in semiconductor materials. (NREL)
Aqueous Chelating Etch: An innovative etching process used to develop microelectronic circuits, high-temperature superconductors, and opto-electronic devices. (NREL)
Atomic Processing Microscope: This microscope enables the manipulation of single atoms and allows the properties of electronic materials to be altered on a nanoscale. (NREL)
Solar Detoxification of Hazardous Organic Materials in Groundwater: Uses sunshine and a simple catalyst to purify contaminated water. (NREL)
Gallium Indium Phosphide/Gallium Arsenide Tandem Solar Cell: A light, highly efficient solar cell that has become the world's standard for powering earth-orbiting satellites. (NREL)
CdTe PV Modules: The first large-size devices to be made from this new thin-film material, which promises to help drop the cost of solar electricity. (NREL)
Spectroscopic Scanning Tunneling Microscope: At the forefront of nanotechnology, this instrument characterizes electro-optical materials down to the atomic scale. (NREL)
Volume-Indexed Secondary Ion Mass Spectrometry: Provides 3-D information about the composition of electronic materials and devices. (NREL)
Copper Indium Diselenide Solar Cell: The first solar cell to use very thin films (less than the thickness of a human hair) of a promising semiconductor material. (NREL)
Low Cost Laser-Diffused Solar Cells (ORNL)
Additional Technical Awards
The following awards recognize the Solar Program's achievements in science and research.
Scientific American 50: This award recognized the world's most efficient land-based solar cell. (NREL and Spectrolab)