U.S. Department of Energy - Energy Efficiency and Renewable Energy
Frequently Asked Questions on Small Wind Systems
Below are frequently asked questions related to using a small wind energy system to power your home. The frequently asked questions below will help you determine if a small wind energy system is practical for powering your home.
By investing in a small wind system, you can reduce pollution and reduce your exposure to future fuel shortages and price increases. Deciding whether to purchase a wind system, however, is complicated; there are many factors to consider. But if you have the right set of circumstances, a well-designed wind energy system can provide you with many years of cost-effective, clean, and reliable electricity.
What are the benefits to homeowners from using wind turbines?
Wind energy systems provide a cushion against electricity price increases. Wind energy systems reduce U.S. dependence on fossil fuels, and they don't emit greenhouse gases. If you are building a home in a remote location, a small wind energy system can help you avoid the high costs of extending utility power lines to your site.
Although wind energy systems involve a significant initial investment, they can be competitive with conventional energy sources when you account for a lifetime of reduced or altogether avoided utility costs. The length of the payback period — the time before the savings resulting from your system equal the system cost — depends on the system you choose, the wind resource in your site, electric utility rates in your area, and how you use your wind system.
Back to Top
Is wind power practical for me?
Small wind energy systems can be used in connection with an electricity transmission and distribution system (called grid-connected systems), or in stand-alone applications that are not connected to the utility grid. A grid-connected wind turbine can reduce your consumption of utility-supplied electricity for lighting, appliances, and electric heat. If the turbine cannot deliver the amount of energy you need, the utility makes up the difference. When the wind system produces more electricity than the household requires, the excess can be sold to the utility. With the interconnections available today, switching takes place automatically. Stand-alone wind energy systems can be appropriate for homes, farms, or even entire communities (a co-housing project, for example) that are far from the nearest utility lines. Either type of system can be practical if the following conditions exist.
Conditions for stand-alone systems
- You live in an area with average annual wind speeds of at least 4.0 meters per second (9 miles per hour)
- A grid connection is not available or can only be made through an expensive extension. The cost of running a power line to a remote site to connect with the utility grid can be prohibitive, ranging from $15,000 to more than $50,000 per mile, depending on terrain.
- You have an interest in gaining energy independence from the utility
- You would like to reduce the environmental impact of electricity production
- You acknowledge the variable nature of wind power and have a strategy for using variable resources to meet your power needs
Conditions for grid-connected systems
- You live in an area with average annual wind speeds of at least 4.5 meters per second (10 miles per hour).
- Utility-supplied electricity is expensive in your area (about 10 to 15 cents per kilowatt-hour).
- The utility's requirements for connecting your system to its grid are not prohibitively expensive.
- Local building codes or covenants allow you to legally erect a wind turbine on your property.
- You are comfortable with long-term investments.
Back to Top
Is my site right?
To get a general idea if your region has good wind resources, look at the Stakeholder Engagement and Outreach Wind Resources page, which has state wind maps. The maps will show you if wind speeds in your area are strong enough to further investigate the wind resource. Of course, the maps are just a starting point — the actual wind resource on your site will vary depending on topography and structure interference. And a localized site with good winds, such as a ridge top, may not show up on the maps.
Another source for wind data is the National Climatic Data Center, which collects data for selected sites and makes area wind data summaries available for purchase.
You will need site-specific data to determine the wind resource at your exact location. If you do not have on-site data and want to obtain a clearer, more predictable picture of your wind resource, you may wish to measure wind speeds at your location for a year. You can do this with a recording anemometer, which generally costs $500 to $1500. The most accurate readings are taken at "hub height" (i.e., the elevation at the top of the wind turbine tower). This requires placing the anemometer high enough to avoid turbulence created by trees, buildings, and other obstructions. The standard wind sensor height used to obtain data for the DOE maps is 10 meters (33 feet).
You can have varied wind resources within the same property. If you live in complex terrain, take care in selecting the installation site. If you site your wind turbine on the top or on the windy side of a hill, for example, you will have more access to prevailing wind than in a gully or on the leeward (sheltered) side of a hill on the same property. Consider existing obstacles and plan for future obstructions, including trees and building, which could block the wind. Also realize the power in the wind is proportional to its speed (velocity) cubed (v3). This means that the amount of power you get from your generator goes up exponentially as the wind speed increases. For example, if your site has an annual average wind speed of about 5.6 meters per second (12.6 miles per hour), it has twice the energy available as a site with a 4.5 meter per second (10 mile per hour) average (12.6/103).
Back to Top
What about legal, environmental, and economic issues?
In addition to reviewing your site and particular situation and goals, you should also
- research potential legal and environmental obstacles
- obtain cost and performance information from manufacturers
- perform a complete economic analysis that accounts for a multitude of factors
- understand the basics of a small wind system, and
- review possibilities for combining your system with other energy sources, backups, and energy efficiency improvements.
Establish an energy budget to help define the size of turbine that will be needed. Since energy efficiency is usually less expensive than energy production, making your house more energy efficient first will likely result in being able to spend less money since you may need a smaller wind turbine to meet your needs.
Potential Legal and Environmental Obstacles
Before you invest any time and money, you may want to research potential legal and environmental obstacles to installing a wind system. Some jurisdictions, for example, restrict the height of the structures permitted in residentially zoned areas, although variances are often obtainable. Your neighbors might object to a wind machine that blocks their view, or they might be concerned about noise. Consider obstacles that might block the wind in the future (large planned developments or saplings, for example). If you plan to connect the wind generator to your local utility company's grid, find out its requirements for interconnections and buying electricity from small independent power producers.
Pricing a System
When you are confident that you can install a wind machine legally and without alienating your neighbors, you can begin pricing systems and components.
Approach buying a wind system as you would any major purchase. Obtain and review the product literature from several manufacturers. Manufacturer information can also be found at times in the periodicals listed below. Once you have narrowed the field, research a few companies to be sure they are recognized wind energy businesses and that parts and service will be available when you need them. Also, find out how long the warranty lasts and what it includes.
Ask for references of customers with installations similar to the one you are considering. Ask system owners about performance, reliability, and maintenance and repair requirements, and whether the system is meeting their expectations.
The Economics of Wind Power for Home Use
A residential wind energy system can be a good long-term investment. However, because circumstances such as electricity rates and interest rates vary, you need to decide whether purchasing a wind system is a smart financial move for you. Be sure you or your financial adviser conduct a thorough analysis before you buy a wind energy system.
Grid-connected-system owners may be eligible to receive a small tax credit for the electricity they sell back to the utility. The National Energy Policy Act of 1992 and the 1978 Public Utilities Regulatory Policy Act (PURPA) are two programs that apply to small independent power producers. PURPA also requires that the utility sell you power when you need it. Be sure you check with your local utility or state energy office before you assume any buy-back rate. Some Midwestern rates are very low (less than $.02/kWh), but some states have state-supported buy-back rates that encourage renewable energy generation. In addition, some states have "net billing," where utilities purchase excess electricity for the same rate at which they sell it.
Also, some states offer tax credits and some utilities offer rebates or other incentives that can offset the cost of purchasing and installing wind systems. Visit the Database of State Incentives for Renewables & Efficiency to learn about incentives in your state or municipality. You can also check with your state's department of revenue, your local utility, public utility commission, or your local energy office for information.
Back to Top
Where can I find more information?
Back to Top
What equipment do I need to run my own home wind energy system?
All wind systems consist of a wind turbine, a tower, wiring, and the "balance of system" components: controllers, inverters, and/or batteries. Hybrid systems use additional equipment, like photovoltaic panels and diesel generators to ensure electricity is available at all times.
Home wind turbines consist of a rotor, a generator mounted on a frame, and (usually) a tail. Through the spinning blades, the rotor captures the kinetic energy of the wind and converts it into rotary motion to drive the generator. Rotors can have two or three blades, with three being more common. The best indication of how much energy a turbine will produce is the diameter of the rotor, which determines its "swept area," or the quantity of wind intercepted by the turbine. The frame is the strong central axis bar onto which the rotor, generator, and tail are attached. The tail keeps the turbine facing into the wind.
A 1.5-kilowatt (kW) wind turbine will meet the needs of a home requiring 300 kilowatt-hours (kWh) per month, for a location with a 6.26-meters-per-second (14-mile-per-hour) annual average wind speed. The manufacturer will provide you with the expected annual energy output of the turbine as a function of annual average wind speed. The manufacturer will also provide information on the maximum wind speed in which the turbine is designed to operate safely. Most turbines have automatic speed-governing systems to keep the rotor from spinning out of control in very high winds. This information, along with your local wind speed distribution and your energy budget, is sufficient to allow you to specify turbine size.
To paraphrase a noted author on wind energy, "the good winds are up high." Because wind speeds increase with height in flat terrain, the turbine is mounted on a tower. Generally speaking, the higher the tower, the more power the wind system can produce. The tower also raises the turbine above the air turbulence that can exist close to the ground. A general rule of thumb is to install a wind turbine on a tower with the bottom of the rotor blades at least 9 meters (30 feet) above any obstacle that is within 90 meters (300 feet) of the tower.
Experiments have shown that relatively small investments in increased tower height can yield very high rates of return in power production. For instance, to raise a 10-kW generator from a 18-meter (60-foot) tower height to a 30-meter (100-foot) tower involves a 10% increase in overall system cost, but it can produce 25% more power.
There are two basic types of towers: self-supporting (free standing) and guyed. Most home wind power systems use a guyed tower. Guyed-lattice towers are the least expensive option. They consist of a simple, inexpensive framework of metal strips supported by guy cables and earth anchors.
However, because the guy radius must be one-half to three-quarters of the tower height, guyed-lattice towers require enough space to accommodate them. Guyed towers can be hinged at the base so that they can be lowered to the ground for maintenance, repairs, or during hazardous weather such as hurricanes. Aluminum towers are prone to cracking and should be avoided.
Balance of System
Stand-alone systems require batteries to store excess power generated for use when the wind is calm. They also need a charge controller to keep the batteries from overcharging. Deep-cycle batteries, such as those used to power golf carts, can discharge and recharge 80% of their capacity hundreds of times, making them a good option for remote renewable energy systems. Automotive batteries are shallow-cycle batteries and should not be used in renewable energy systems because of their short life in deep cycling operations.
In very small systems, direct current (DC) appliances operate directly off the batteries. If you want to use standard appliances that require conventional household alternating current (AC), however, you must install an inverter to convert DC electricity to AC. Although the inverter slightly lowers the overall efficiency of the system, it allows the home to be wired for AC, a definite plus with lenders, electrical code officials, and future homebuyers.
For safety, batteries should be isolated from living areas and electronics because they contain corrosive and explosive substances. Lead-acid batteries also require protection from temperature extremes.
In grid-connected systems, the only additional equipment is a power-conditioning unit (inverter) that makes the turbine output electrically compatible with the utility grid. No batteries are needed. Work with the manufacturer and your local utility on this.
According to many renewable energy experts, a stand-alone "hybrid" system that combines wind with photovoltaic (PV) technologies and/or a diesel generator offers several advantages.
In much of the United States, wind speeds are low in the summer when the sun shines brightest and longest. The wind is strong in the winter when there is less sunlight available. Because the peak operating times for wind and PV occur at different times of the day and year, hybrid systems are more likely to produce power when you need it.
For the times when neither the wind generator nor the PV modules are producing electricity (for example, at night when the wind is not blowing), most stand-alone systems provide power through batteries and/or an engine-generator powered by fossil fuels like diesel.
If the batteries run low, the engine-generator can be run at full power until the batteries are charged. Adding a fossil-fuel-powered generator makes the system more complex, but modern electronic controllers can operate these complex systems automatically. Adding an engine-generator can also reduce the number of PV modules and batteries in the system. Keep in mind that the storage capability must be large enough to supply electrical needs during non-charging periods. Battery banks are typically sized for one to three days of windless operation.
Back to Top
Where can I learn more about small wind systems?
OpenEI's Small Wind Guidebook includes frequently asked questions, wind resource maps, and lists of financial incentives and contacts.
Back to Top